30x60 Pole Barn Cost 2026: $18,000-$75,000 Kit vs Built

A 30x60 pole barn costs $18,000 to $75,000 in 2026 depending on kit vs. contractor-built and how finished the interior is. The most common build — a contractor-built shell with a concrete slab and basic electrical — averages $45,000 to $55,000 nationally.

30x60 pole barn cost at a glance (2026):

Kit only (materials): $18,000 – $28,000

Kit + hired labor: $26,000 – $42,000

Contractor-built shell: $30,000 – $48,000

With concrete slab: $39,000 – $60,000

Slab + electrical: $44,000 – $66,000

Fully finished (insulated, wired, doors): $50,000 – $75,000

Per-square-foot: $10 – $42 (1,800 sqft)

National average (contractor + slab + basic electrical): $45,000 – $55,000

At 1,800 square feet, the 30x60 is the workhorse size for serious farm operations, large equipment storage, or anyone who outgrew a 30x40. It’s big enough to park three full-size tractors, set up a multi-stall horse barn with an indoor arena, store a motorhome plus a boat plus a workshop, or run a small commercial operation — all under one roof.

This guide breaks down every cost component for a 30x60 build so you can budget accurately for your specific project.

30×60 Pole Barn Price Summary

Configuration	Price Range
Kit only (materials)	$18,000–$28,000
Kit + hired labor	$26,000–$42,000
Contractor-built (shell only)	$30,000–$48,000
With concrete slab	$39,000–$60,000
With slab + electrical	$44,000–$66,000
Fully finished (insulated, wired, doors)	$50,000–$75,000

The national average for a contractor-built 30x60 pole barn with a concrete slab and basic electrical is approximately $45,000 to $55,000.

Kit vs Contractor-Built Pricing

30×60 Pole Barn Kit: $18,000–$28,000

A typical 30x60 kit from a manufacturer like Morton, Lester, Wick, or Menards includes:

Pre-cut treated posts (typically 6x6, qty 14–18)
Pre-engineered trusses (15–16 trusses at 4’ spacing)
Purlins and girts
29-gauge steel roofing and siding panels
Ridge cap, trim, and all fasteners
One overhead door frame opening
One walk-in door
Hardware and detailed assembly instructions

What’s NOT included in most kits:

Concrete slab or gravel base
Overhead door (just the frame opening)
Electrical, plumbing, or insulation
Site preparation or excavation
Permits and engineering stamps

Budget an additional $10,000–$22,000 for a concrete slab, overhead doors, and basic electrical — bringing the total kit project cost to roughly $28,000–$50,000 plus your labor.

Contractor-Built: $30,000–$48,000

Hiring an experienced pole barn contractor to build from the ground up (shell only, no slab) typically runs $30,000 to $48,000 for a 30x60. This includes all materials, labor, and usually the building permit.

The price varies by region. In Indiana, Ohio, or Iowa (pole barn country), expect $30,000–$38,000. In the Northeast or West Coast, plan on $40,000–$48,000 or more.

Concrete Slab Cost for a 30×60

A concrete slab adds $9,000 to $15,000 to your project:

Slab Type	Cost
4” standard slab (gravel base)	$9,000–$12,000
4” slab with wire mesh	$10,500–$13,500
6” reinforced slab (heavy equipment / tractor)	$12,500–$15,500
Thickened edge (perimeter footing)	Add $800–$2,000

At 1,800 square feet, you’re paying roughly $5 to $8.50 per square foot for concrete, including site prep and finishing.

Pro tip: If you’ll store tractors, combines, or any wheeled equipment heavier than a passenger truck, spec a 6” slab with rebar. The extra $3,000 saves you from cracking under load — and concrete repair on a 1,800 sq ft floor is more expensive than building it right the first time.

What Affects 30×60 Pole Barn Pricing?

Height

Standard eave height is 12 feet. For tractor or motorhome storage you’ll often want 14–16 feet, which adds $3,500–$7,000 in longer posts, more siding, and structural reinforcement. For combine clearance (most modern combines need 16+ feet at the door), budget 16-foot eaves and 18-foot doors — total height adds $5,000–$9,000 to the base build.

Number of Overhead Doors

A 30x60 typically has 2–4 overhead doors. Pricing per door:

10x10 standard overhead door: $800–$2,000 installed
12x12 (taller vehicles, tractors): $1,500–$3,500
14x14 (RV / combine): $2,800–$5,500
16x16 commercial: $4,500–$8,000

A 30x60 with two 12x12 doors plus one walk-in runs $3,500–$7,500 just in doors.

Steel Gauge

29-gauge (standard): Adequate for residential and light agricultural use
26-gauge (premium): 30% thicker, better hail and dent resistance, longer warranty — adds $2,500–$4,500 across the larger surface area

Insulation

Fiberglass batts (walls and ceiling): $2,500–$4,500
Spray foam: $7,000–$13,000
Vinyl-backed insulation blankets: $3,500–$6,500
Reflective bubble wrap (heat barrier only): $1,200–$2,500

Electrical

Basic package (panel, 8–12 outlets, lights): $3,500–$5,500
Workshop / barn package (subpanel, 220V circuits, more outlets): $5,500–$9,500
Heavy commercial (3-phase, multiple subpanels): $9,000–$15,000

Location

Pricing varies 20–40% by region. Midwest farm states (IN, OH, IA, MN, WI) have the lowest prices and the densest contractor competition. West Coast and Northeast states are 25–35% higher. Check our state cost guides for your area.

30×60 Pole Barn Cost by Use

Farm Equipment Storage

Total cost: $32,000–$48,000

Shell with two 12x12 overhead doors, gravel floor, no insulation. The most affordable configuration. Designed for tractors, planters, balers, hay storage, or general implement parking. Most farmers stop here — a slab adds cost without adding much value for equipment-only storage.

Workshop / Garage Combo

Total cost: $48,000–$68,000

Concrete slab, two overhead doors, walk-in door, basic electrical with lighting and outlets, vinyl-backed insulation. Common configuration for someone who wants a 4–5 car garage with a generous workshop area. See our pole barn garage cost guide for detailed garage pricing.

Horse Barn (6–8 Stalls + Tack Room)

Total cost: $50,000–$75,000

Includes 6–8 stalls (10x10 or 12x12), tack room, wash bay, ventilation, dirt or stall-mat floor, water supply, and exterior turnout door. Some builds add a small indoor riding area at one end. Read our horse barn cost guide for detailed equestrian pricing.

RV / Boat Storage Plus Workshop

Total cost: $44,000–$62,000

14-foot eaves, one 14x14 overhead door (RV pull-through), one 10x10 overhead door (boat or vehicle), partial slab (in the parking bay only), basic electrical. Lets you park a Class A motorhome, a boat, and still have a workshop area at the back.

Small Commercial / Light Industrial

Total cost: $55,000–$80,000

6” reinforced slab, 200A 3-phase electrical, 16-foot eaves, two 12x12 overhead doors, full insulation, dedicated office partition. Suitable for auto body shops, small contractor yards, or light manufacturing.

Sample Cost Breakdown: 30×60 Workshop + Equipment Storage

Here’s a real-world budget breakdown for a typical 30x60 build in the Midwest — used as a workshop on one end and tractor storage on the other:

Item	Cost
Post-frame shell (materials + labor, 14’ eaves)	$34,000
4” concrete slab with wire mesh (workshop end, 30x30)	$5,500
Compacted gravel floor (storage end, 30x30)	$1,800
Two 12×12 overhead doors	$4,000
One walk-in door (steel, insulated)	$500
Two 4×3 windows	$750
Electrical (200A panel, workshop subpanel, outlets, LEDs)	$5,800
Vinyl-backed insulation (workshop half only)	$1,800
Site prep, gravel base, drainage	$2,800
Building permit + engineering stamp	$600
Total	$57,550

This is a mid-range build that splits the building into two functional zones. You could trim $7,000–$10,000 by skipping the workshop slab and insulation. Or add $10,000–$15,000 for a full slab, spray foam, heavier electrical, and a small heating system.

How to Get the Best Price on a 30×60

Get at least 3 quotes. Request free estimates from local builders — pricing on a 30x60 swings $10,000+ between contractors.
Build in the off-season. October through February brings the lowest bids — most contractors slow down and discount to keep crews busy.
Bundle the slab with the build. Pouring concrete during initial construction is 20–30% cheaper than retrofitting later. The pump truck is already on site.
Order a kit and hire a crew. This hybrid approach often saves 15–25% versus full contractor pricing while avoiding the DIY learning curve. Many regions have crews that specialize in kit assembly for $8,000–$14,000 on a 30x60.
Stick to standard dimensions. A 30x60 uses standard 30-foot truss spans and 4-foot purlin spacing — custom sizes waste material and engineering time.
Pre-order doors directly. Overhead doors marked up by builders run 20–40% more than buying them from a garage door supplier and having the builder install.

Frequently Asked Questions

How much does a 30x60 pole barn kit cost? A 30x60 pole barn kit costs $18,000 to $28,000 for materials from major suppliers like Morton, Lester, Wick, or Menards. This includes posts, trusses, steel roofing and siding, trim, and fasteners — but not the concrete slab, overhead doors, electrical, or insulation. Plan another $10,000–$22,000 for those finishing items.

How much does it cost to build a 30x60 pole barn with a concrete slab? A 30x60 pole barn with a concrete slab costs $39,000 to $60,000 contractor-built. The building shell runs $30,000 to $48,000, and the 1,800 sq ft concrete slab adds $9,000 to $15,000 depending on thickness and reinforcement.

Can I build a 30x60 pole barn myself? Yes, but it’s a stretch for a solo DIY project. Most kit builders recommend at least two experienced helpers and 6–10 weekends of work. The 30-foot trusses are heavy and awkward to lift — you’ll need a tractor with a boom, a telehandler, or a small crane to set them safely. The concrete slab almost always requires hiring a contractor regardless of DIY commitment.

How many cars or tractors fit in a 30x60 pole barn? A 30x60 pole barn (1,800 sq ft) comfortably fits 5 full-size vehicles in a 2-row layout, or 3 tractors with implements parked behind them. With 12-foot eaves you can fit two pickups stacked end-to-end front-to-back through a single bay. Combines and large self-propelled sprayers typically need the full 30-foot width plus 16-foot eaves.

Is a 30x60 big enough for a horse barn? Yes — a 30x60 fits 6–8 standard 10x10 or 12x12 stalls with a center aisle, plus a tack room and wash bay. If you want an attached indoor arena, a 30x60 alone won’t fit one — pair the barn with a separate 60x120 arena or upgrade to a 40x80+ with a covered arena.

What size overhead door do I need for a 30x60 pole barn? For pickup trucks and SUVs, 10x10 doors work. For tractors with cabs, mid-size combines, or RVs, plan on 12x12 minimum and often 14x14. For modern large combines (8R+ headers), you need 16x16 doors and 18-foot eaves — at that point, talk to a builder before finalizing the design.

How long does a 30x60 pole barn take to build? A professional crew can erect the shell in 5–8 days. Add 2–3 days for the concrete slab (plus 5–7 days cure time before driving on it) and 3–5 days for electrical. Total project timeline: 3–5 weeks with a contractor. DIY builds typically take 8–14 weeks.

Do I need a permit for a 30x60 pole barn? Almost always yes — most jurisdictions require permits for any structure over 200 square feet, and a 30x60 is 1,800 sq ft. Permit costs run $200–$1,200 depending on county. Some agricultural-zoned land has exemptions, but only for non-residential uses; check with your local building department before assuming.

Get Your Free 30×60 Pole Barn Estimate

Ready to price out your 30x60 pole barn? Get free quotes from local builders who know your area’s soil conditions, codes, and current material pricing. On a project this size, comparing at least three estimates is essential — the spread between the lowest and highest bid is typically $8,000–$15,000.

For other sizes, see our complete pole barn cost guide or browse state-specific pricing.